datasheet plug-in do not forget to visit us at: www .crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. ed series ? dc output solid state relay in an industry standard emr plug in package ? ratings of 5 amps ? load voltage range of 1-48 and 1-80 vdc ? fits standard din rail & pcb mountable sockets ? led input status indicator ? ac or dc control ? cul recognized, iec rated, ce & rohs compliant ? motor controller rated product selection control voltage 5 a 5 a 5-15 vdc control ed06d5 ed10d5 18-32 vdc control ed06c5 ed10c5 48-72 vdc control ed06f5 ed06e5 ed06b5 ed10f5 18-36 vac control ed10e5 90-140 vac control ED10B5 available options output specifications dc output (1) description 5 a 5 a operating voltage [vdc] (2) 1-48 1-80 maximum load current, ul 508 resistive, [adc] 5 5 maximum load current, iec 60947-4-1 dc-1, dc-3 [adc, fla] 5 5 maximum load current ul 508 motor controller [fla] (3) 2.0 2.0 minimum load current [madc] 2.5 2.5 maximum off-state leakage current @ rated voltage [a] 20 20 maximum on-state voltage drop @ rated current and 40c [vdc] 0.3 0.3 maximum surge current (10ms) [adc] 60 60 maximum pwm [hz] (4) 500 500 series operational current 5: 5 amps control voltage b: 90-140 vac c: 18-32 vdc d: 5-15 vdc e: 18-36 vac f: 48-72 vdc ed 06 c 5 required for valid part number for options only and not required for valid part number output voltage 06: 1-48 vdc 10: 1-80 vdc f d e-07-01 rev. a
datasheet plug-in do not forget to visit us at: www .crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. input specifications (1) edxxb5 edxxe5 edxxf5 edxxc5 edxxd5 description control voltage range 5-15 vdc 18-32 vdc 48-72 vdc 18-36 vac 90-140 vac minimum turn-on voltage 5 vdc 18 vdc 48 vdc 18 vac 90 vac minimum turn-off voltage 1.3 vdc 2 vdc 4 vdc 4 vac 11 vac maximum reverse voltage 3 vdc 3 vdc 3 vdc n/a n/a minimum input current [ma] 11 10.7 10.8 12 7.3 maximum input current [ma] 42.8 19.7 16.3 25.3 10.9 nominal input impedance [ohms] 350 1.6k 4.4k 1.5k 12.5k 0.6 0.6 0.6 0.6 0.6 maximum turn-off time [msec] 0.3 0.3 0.3 0.3 0.3 general specifications (1) parameters description dielectric strength, input/output (50/60hz) 2500 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohms maximum capacitance, input/output 10 pf ambient operating temperature range -30oc to 80oc ambient storage temperature range -40oc to 125oc weight (typical) 0.71 oz. (30 g) maximum humidity 85% non-condensing housing material pbt 30% gf, ul94 v-0 terminals material copper w/sulfamet nickel ?nish general notes 1) all parameters at 25c unless otherwise speci?ed. 2) maximum rated voltage for ed06xx is 60 vdc and 100 vdc for ed10xx 3) maximum motor controller current is 1.5 fla for edxxb5 and edxxe5 4) pwm does not apply to edxxb5 and edxxe5 thermal derate information 6.0 5.0 4.0 3.0 2.0 1.0 10 20 30 40 50 60 70 80 0 ambient temperature (oc) load current (amps) derating curve: edxxx5 maximum turn-on time [msec] (4)
datasheet plug-in do not forget to visit us at: www .crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. above curve is based on a minimum spacing between parts of 16mm. maximum current @ 0mm spacing is 3a. derating value: ed06x5, d10x5 = 0.125a per mm derating based on relay air gap: example: 10mm spacing with a ed06d5 ssr 1.- subtract spacing from the minimum required spacing of the part (16mm) to get the correction value. 16-10=6 2.- multiply air gap derating value found above with correction value. 0.125 x 7 = 0.75a now using this final number we can figure out what the maximum current the relay can carry with 10mm spacing @ 60c ambient. 3.- using the ambient derating curve above find the current for the 5a model @ 60c. in this case that calue is 2.5a. 4.- subtract the value above (0.75a) from 2.5a. 2.5-0.75 = 1.75a the maximum current you can switch with the ed06d5 with a 10mm air gap between relays @ 60c ambient is 1.75a wiring diagram - vdc + vdc + led 5/a2 1/a1 4 3+ control circuit -v dc load a load b +v dc load can be wired in position a or b
datasheet plug-in do not forget to visit us at: www .crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. agency approvals designed in accordance with the requirements of iec 62314 iec 61000-4-2 : electrostatic discharge level 1 ? criteria a iec 61000-4-4 : electrically fast transients level 2 ? criteria b iec 61000-4-5 : electrical surges level 3 ? criteria b e116949 accessories din rail mountable socket part no.: drsed fingersafe ip10 din rail mountable socket to mount ed series relays onto standard 35 mm din rail. rated at 250 v ac/dc, 12 amps. the drsed includes m3 combo screws. pc board mountable socket part no.: pcbsed pc board mountable socket for ed series relays. rated at 250 v ac/dc, 12 amps. suggested pin-out hole diameter: 1.0 mm ed series accessories drsed pcbsed mechanical specifications tolerances: 0.02 in / 0.5 mm all dimensions are in: inches [millimeters] .99 [25.0] 1.10 [27.9] .02 [0.5] .82 [20.8] .24 [6.1] .19 [4.8] .21 [5.3] .20 [5.1] 1.47 [37.4] dc output: 5 amps ac control: b, e suffix dc output: 5 amps ac control: c,d & f suffix .12 [3.0] .10 [2.5] .39 [9.9] 1.14 [29.0] .50 [12.7] .30 [7.6] rev. 081017 ecn 20296
datasheet plug-in do not forget to visit us at: www .crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. danger / peligro / danger /gefahr / pericolo / h a z a r d o f e l e ct ric s ho ck, e x p l o s io n, o r a r c flash. ? di s c o n n e c t a l l p o w e r b e f o r e i n s ta l l i n g o r wo r k i n g w i t h th i s equipment. ? v e r i f y a l l c o n n e c ti o n s a n d r e p l a c e a l l c o v e r s b e f o r e tu r n i n g o n p o w e r . f a ilu r e t o f o llo w t h e s e in s t r u c t io n s w ill r e s u lt in d e a t h o r s e r io u s in ju r y . rie s g o de de s c a rg a e l e ct ric a o e x p l o s io n. ? de s c o n e c ta r to d o s l o s s u m i n i s tr o s d e e n e r g i a a e s te e q u i p o a n t e s d e tr a b a j a r c o n e s te equipo. ? v e r i f i c a r to d a s l a s conexiones y colocar todas l a s ta p a s antes d e energizer el e q u i p o . e l in c u m p lim ie n t o d e e s t a s in s t r u c c io n e s p u e d e p r o v o c a r la m u e r t e o le s io n e s s e r ia s . ris q u e de de s ch a rg e e l e ct riq ue o u explosion ? e te i n d r e to u te s l e s s o u r c e s d ' n e r g i e d e c e t a p p a r e i l a v a n t d e tr a v a i l l e r d e s s u s d e c e t a p p a r e i l ? vrifier tous connections, et remettre tous couverts en olace avant de mettre sous de n o n-s u iv i d e c e s in s t r u c t io n s p r o v o q u e r a la m o r t o u d e s l s io n s srieuses s r i e u s e s. g e f a hr e in e s e l e kt ris ch e n s chl a g e s o de r e ine r e x p l o s io n. ? s te l l e n s i e j e g l i c h e n s tr o m a b , d e r d i e s e s g e r ? t v e r s o r g t, bevor s i e a n dem g e r ? t arbeiten d u r c h f h r e n ? v o r d e m dr e h e n a u f e n e r g i e a l l e a n s c h l s s e b e r p r f e n u n d a l l e a b d e c k u n g e n e r s e t z e n. un t e r la s s u n g d ie s e r a n w e i s u n g e n k ? n n e n z u m t o d e o d e r z u s c h w e r e n v e r le t z u n g e n f h r e n. ? ? ? ? ? ?? ??? ? ??? ? ris chio di s co s s a e l e t t ric a o de l l ?e s p l o s ione. ? s p e n g a tu tt a l ' a l i m e n ta z i o ne c h e f o r n i s c e q u e s ta a p p a r e c c h i a t ura p r i m a d i lavorare a questa a p p a r e c c h i a t ura ? v e r i f i c a r e t u tti i c o l l e g a m e n ti e s o s ti tu i r e tu tte l e coperture p r i m a d e l l ?accensione l ' o m is s io n e d i q u e s t e istruzioni p r o v o c h e r l a m o r t e o le s io n i s e r i e warning / avertissement / warnung /advertencia / avvertenza / risk of material damage and hot enclosure ? the product's side panels may be hot, allow the product to cool before touching. ? follow proper mounting instructions including torque values. ? do not allow liquids or foreign objects to enter this product. failure to follow these instructions can result in serious injury, or equipment damage. risque de dommage materiel et de surchauffe du boitier ? les panneaux latraux du produit peuvent tre chauds. laisser le produit refroidir avant de le toucher. ? respecter les consignes de montage, et notamment les couples de serrage. ? ne pas laisser pntrer de liquide ni de corps trangers l'intrieur du produit. le non-respect de cette directive peut entra?ner, des lsions corporelles graves ou des dommages matriels. die nichtbeachtung dieser anweisung kann k?rperverletzung oder materialsch?den zur folge haben. gefahr von materialsch?den und geh?useerhitzung ? die seitenw?nde k?nnen hei? sein. lassen sie das produkt abkhlen, bevor sie es berhren. ? beachten sie die montageanweisungen, ? fhren sie keine flssigkeiten oder fremdk?rper in das produkt ein. si no se respetan estas precauciones pueden producirse graves lesiones, da?os materiales. riesgo de da?os materiales y de sobrecalentamiento de la unidad ? los paneles laterales del producto pueden estar calientes. esperar que el producto se enfre antes de tocarlo. ? respetar las instrucciones de montaje, y en particular los pares de apretado. ? no dejar que penetren lquidos o cuerpos extra?os en el producto. ??? ??? ???? ? ?????? ? ? ?????? ? ??? la mancata osservanza di questa precauzione pu causare gravi rischi per l'incolumit personale o danni alle apparecchiature. rischio di danni materiali e d'involucro caldo ? i pannelli laterali dell'apparecchio poss ono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo. ? seguire le istruzioni di montaggio corrette. ? non far entrare liquidi o oggetti estranei in questo apparecchio.
datasheet plug-in do not forget to visit us at: www .crydom.com copyright ? 2017 crydom inc. specifications subject to change without notice. annex - e n v i ronmental information the environmental information disclosed in this annex including the eip pollution logo are in compliance w i th people?s republic of china electronic industr y standard sj/t11364 ? 2006, marking for c ontrol of pollution caused by electronic information products. part name toxic or hazardous substance and elements lead mercury cadmium hexavalent polybrominated polybrominated (pb) (hg) (cd) chromium (cr (vi)) biphenyls (pbb) diphenyl ethers (pbde) semiconductor die solder - ? ?????????????? sj/t11364 - 2006, ?????? ??? ? ? (pb) (hg) (cd) (cr (vi)) (pbb) (pbde) ?? ? 50
|
